cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
kobilevi
Ivory

Peak bandwith on interfaces?

Hello 

i have 2 check point in cluster and i want to check peak bandwith history on the interfaces ?  can someone help?

Tanks

0 Kudos
4 Replies
Highlighted

Re: Peak bandwith on interfaces?

If monitoring blade is activated you can create a custom report in smartview monitor (logs and monitor -> new tab -> "Tunnel & User Monitoring"). There should be a report named "Top Interfaces" that might already give you all the information you want. Alternatively the command cpview can be configured to save past states "cpview history on" and then "cpview -t". Use "+" and "-" to move from snapshot to snapshot. Check past peak values in "network.interfaces.traffic".

kobilevi
Ivory

Re: Peak bandwith on interfaces?

hello i have 2 appliance , i have 2 columns "peak" and i need to know the peak traffic both in interfaces eth2 on same time both applaince ... ideas? 

 

 

Capture.PNG

0 Kudos
Admin
Admin

Re: Peak bandwith on interfaces?

If you want to do it in cpview, history mode needs to be enabled.
See: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...
0 Kudos
kobilevi
Ivory

Re: Peak bandwith on interfaces?

ok tanks  alot!!!

 

but if i have 2 appliance and i want both statistic in right time it is possible ???

example :

 

appliance 1 --> eth 2 output 4 MPS 

appliance 2 ---> eth2 output 4 MPS

i want history graph that show 8 MPS together

tanks

0 Kudos