Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Stelios
Contributor

Full physical memory on R80

Hi guys,

 

What is the commands/steps to reduce the memory when the swap memory is above the 0?

 

 

0 Kudos
4 Replies
G_W_Albrecht
Legend
Legend

Use the following steps:

- open up the box

- remove as much memory as you need

- be happy 😎

CCSE CCTE CCSM SMB Specialist
0 Kudos
AntiSpoofing
Explorer
Explorer

If I understand your question; you are showing full physical memory utilization AND you are starting to see swap usage (>0).  My inclination is to reboot/restart the gateway during a maintenance window.  Linux has a tendency to used free memory to cache frequently used files to speed up the performance of the device.  Unfortunately, this also decreases the "free" memory.  The solution is the reboot; normally once every 6 months with a failover, actually not a bad idea since you are confirming the boot sector.

 

HTH!

0 Kudos
Dmitry_Krupnik
Employee Alumnus
Employee Alumnus

Hi Stelios,

I suggest to start from investigation step and make sure, that there are no configuration problems. Please provide more information about your device, version, setup and blades which you are using. 

0 Kudos
PhoneBoy
Admin
Admin

On what exactly?
Gateway?
Management?
Precise version/JHF level installed?
A dump of running processes might be useful also.
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events