Hi I have one issue started post configuration of VSLS in vSX environment.
When I do cphaprob stat in vSX GW2 it shows, however VSXGW1 everything all ports are up.
[Expert@VSX-GW2:0]# cphaprob stat
Cluster Mode: Virtual System Load Sharing
Number Unique Address Assigned Load State
1 11.11.11.11 100% Active
2 (local) 11.11.11.12 0% Standby
Local member is in current state since Thu Mar 11 05:39:36 2021
Cluster name: VSX-CLUSTER
Virtual Devices Status on each Cluster Member
=============================================
ID | Weight| VSX-GW1 | VSX-GW2
| | | [local]
-------+-------+-----------+-----------
1 | 10 | Standby | Active!
2 | 10 | Active | Down
---------------+-----------+-----------
Active | 1 | 1
Weight | 10 | 10
Weight (%) | 50 | 50
Legend: Init - Initializing, Active! - Active Attention
Down! - ClusterXL Inactive or Virtual System is Down
[Expert@VSX-GW2:0]#
[Expert@VSX-GW2:0]# cphaprob -a if
vsid 0:
------
Required interfaces: 2
Required secured interfaces: 1
eth0 UP non sync(non secured), broadcast
eth4 UP sync(secured), broadcast
Virtual cluster interfaces: 1
eth0 10.0.0.99
vsid 1:
------
Required interfaces: 3
Required secured interfaces: 1
eth4 UP sync(secured), broadcast
eth2 UP non sync(non secured), broadcast (eth2.20 )
eth3 DOWN (2166.3 secs) non sync(non secured), broadcast (eth3.20 )
Virtual cluster interfaces: 2
eth2.20 172.16.20.1
eth3.20 192.168.20.1
vsid 2:
------
Required interfaces: 2
Required secured interfaces: 1
eth4 UP sync(secured), broadcast
eth2 UP non sync(non secured), broadcast (eth2.10 )
eth3 DOWN (2160.4 secs) non sync(non secured), broadcast (eth3.10 )
Virtual cluster interfaces: 2
eth2.10 172.16.10.1
eth3.10 192.168.10.1
I tried to configure cphaconf set_ccp broadcast and with the help of this eth2 is UP and stable but still Eth3 is showing DOWN.
Any idea what to be checked and done to fix the issue?
