Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Sharma_Prashant
Participant

mechanism to verify the interface status Change

Do we have mechanism or method to find out 'how many times a particular interface went down ' ..specially to cross verify the ISP or switch as next hop..? specially through CLI..

0 Kudos
2 Replies
Timothy_Hall
Champion
Champion

From clish run "show interface INTERFACE" or from expert mode you can issue the command "ifconfig INTERFACE" and look at the "carrier" counter.   This starts at zero when the system boots and increments every time link integrity on that interface is lost.  So unplugging the cable, attached switch gets rebooted, etc.  Interface state transitions are also logged by syslog in /var/log/messages.

If link integrity is maintained but the next routing hop goes down (so the upstream switch providing link integrity is OK but the upstream router dies or otherwise becomes unavailable) you do have the option to set the "ping" option for the route, and the route will be removed from the table if the next hop does not respond.  Generally though this ping option for static routes should only be used if you have more than one route to the same destination, such as a dual default gateway.

The ISP Redundancy feature has ping monitoring as well along with many different real-time notification options for ISP failure.

--
My book "Max Power: Check Point Firewall Performance Optimization"
now available via http://maxpowerfirewalls.com.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos
Sharma_Prashant
Participant

Many thanks..:)

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events