cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question
Network_M
Copper

Total bandwith of interfaces and each IP

Jump to solution

1. Is it possible to see in/out traffic (total bandwidth) of each interface of Checkpoint as graph in Management? How?

2. How to see this kind of VIEW in Management: All IP addresses that destinated to Internet and their traffic near them (sorted by traffic). For example, Source IP:192.168.120.1 Destination:Internet Traffic total:5GB

Tags (1)
1 Solution

Accepted Solutions
Vladimir
Pearl

Re: Total bandwith of interfaces and each IP

Jump to solution

You're likely have to enable these settings to see the pertinent data in a SmartView Monitor:

and call-up Smartview Monitor, somewhat counter-intuitively, not from SmartView, but from "Tunnel And User Monitoring:

10 Replies

Re: Total bandwith of interfaces and each IP

Jump to solution

This depends on the version you are using. What do you have, both MGMT and GW versions?

0 Kudos
Network_M
Copper

Re: Total bandwith of interfaces and each IP

Jump to solution

R 80.10. Both MGMT and GWs

0 Kudos

Re: Total bandwith of interfaces and each IP

Jump to solution

The SmartView Monitor (licensed feature) has always been the answer to such needs, not sure about all the hot new features of R80.xx but logically doubt Checkpoint would provide the same information for free, undermining everyone who pays/paid for SmartView Monitor lic.

0 Kudos

Re: Total bandwith of interfaces and each IP

Jump to solution

R80.X does not have anything new for the matter at this point in time. My reason for asking about the version is that although SmartViewMmonitor GUI client exists, R80.X SmartConsole package, it's not available through SmartConsole itself. Also, config is a bit different in order to make it work. 

Any yes, Advanced Networking license (which includes not only Monitoring, but also Clustering and many other popular features) should be attached to the GW in question

0 Kudos
Network_M
Copper

Re: Total bandwith of interfaces and each IP

Jump to solution

We have license for SmarView Monitor, but how to exactly see traffic?

0 Kudos
Vladimir
Pearl

Re: Total bandwith of interfaces and each IP

Jump to solution

You're likely have to enable these settings to see the pertinent data in a SmartView Monitor:

and call-up Smartview Monitor, somewhat counter-intuitively, not from SmartView, but from "Tunnel And User Monitoring:

Network_M
Copper

Re: Total bandwith of interfaces and each IP

Jump to solution

In my SmartConsole, there is no "External Apps". How to find it?

0 Kudos
Jerry
Gold

Re: Total bandwith of interfaces and each IP

Jump to solution

under the LOG section Smiley Happy should be there ... no?

Jerry
Network_M
Copper

Re: Total bandwith of interfaces and each IP

Jump to solution

Too much thanks, I have found! Now I can see what I want.

0 Kudos
Network_M
Copper

Re: Total bandwith of interfaces and each IP

Jump to solution

It shows only real time BANDWITH of interfaces. Can we see its history? For example, last month.

0 Kudos