cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted

Tacacs+ SmartDshboard authentication

Jump to solution

Hello,

Not work  tacacs authentication in SmartDshboard. But on this managment applince ssh and WebUI tacacs authentication is work. In log "Administrator failed to log in: Wrong Password"

Tacacs server is Cisco ISE.

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted

Re: Tacacs+ SmartDshboard authentication

Jump to solution

We solve.

 

When authenticating through Web, SSH, we have one request - one reply, as usual

.

When use tacacs  authentification  for WebUI or SSH checkpoint send only one request to tacacs server. Its default configuration tacacs server on Cisco ISE.

But, when use tacacs  authentification  for SmartDashboard, sends three request (1- Action=Login, 2-Username, 3- Password ) . 

Need configure Cisco ISE tacacs policy condition  to “match NetworkAccess username”.

 

Discribe bug :

https😕/bst.cloudapps.cisco.com/bugsearch/bug/CSCvm51754/?rfs=iqvred

View solution in original post

3 Replies
Highlighted
Admin
Admin

Re: Tacacs+ SmartDshboard authentication

Jump to solution
Have you configured a TACACS server in SmartConsole?
Have you created the appropriate administrator users in SmartConsole and configured them for TACACS authentication?
May be relevant also: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...
0 Kudos
Highlighted

Re: Tacacs+ SmartDshboard authentication

Jump to solution

We solve.

 

When authenticating through Web, SSH, we have one request - one reply, as usual

.

When use tacacs  authentification  for WebUI or SSH checkpoint send only one request to tacacs server. Its default configuration tacacs server on Cisco ISE.

But, when use tacacs  authentification  for SmartDashboard, sends three request (1- Action=Login, 2-Username, 3- Password ) . 

Need configure Cisco ISE tacacs policy condition  to “match NetworkAccess username”.

 

Discribe bug :

https😕/bst.cloudapps.cisco.com/bugsearch/bug/CSCvm51754/?rfs=iqvred

View solution in original post

Highlighted

Re: Tacacs+ SmartDshboard authentication

Jump to solution

It's very helpful solution

0 Kudos