cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question

R80.20M1 HP Gen 9 openservers

We are using open servers for Mgmt and GW's, more specifically HP Gen9 servers, and have previously followed sk108200 - The required steps before installing Gaia OS on HP ProLiant Gen9 servers (disabling UEFI, HyperThreading, etc).  This SK has been updated for 80.10 but there is no mention of 80.20.  Do I need to maintain the sk108200 settings for an R80.20M1 install or do the kernel/OS updates negate the need for some or all of these settings?

 

 Thanks.

0 Kudos
3 Replies
Admin
Admin

Re: R80.20M1 HP Gen 9 openservers

I would assume the same steps apply, even with the new kernel.

0 Kudos

Re: R80.20M1 HP Gen 9 openservers

Thanks Dameon.

I am just trying to determine if I will see my entire disk >2TB or not with just the new Linux Kernel. I thought UEFI had to be enabled for support of the larger partitions.

0 Kudos
Admin
Admin

Re: R80.20M1 HP Gen 9 openservers

Probably worth confirming to make sure.

Submitted some feedback on the SK Smiley Happy

0 Kudos