cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question
Highlighted

Checkpoint DHCP Server Configuration

checkpoint DHCP Server

I have DHCP Server configured on firewall and configured interface has the same subnet 10.0.8.0/22 which cover around 1024 hosts.

Now I need to increase the subnet for DHCP Pool, So do i need to make the changes on GW interface or making the changes for DHCP server will work fine ?

add dhcp server subnet 10.0.8.0 include-ip-pool start 10.0.8.1 end 10.86.11.254

0 Kudos
2 Replies
Danny
Pearl

Re: Checkpoint DHCP Server Configuration

Please elaborate in more detail.

You really want a DHCP pool starting at 10.0.8.1 and ending at 10.86.11.254? That is a very huge increase. Either way, you need to do the changes on both, your interface (or routes through that interfaces to the other 10. networks) and the DHCP range as well.

0 Kudos

Re: Checkpoint DHCP Server Configuration

Hi Danny, 

Thanks for the response.

That was the typo.. original dhcp pool range is 10.0.8.1-10.0.8.254 (10.0.8.0/22) and same network is configure on interface. So the requirement is to increase the DHCP pool by another 500 addresses. So I was wondering if I need to make same changes on the interface. 

As you have already mentioned .. changes on interfaces is also required.. so I ll proceed accordingly. Thanks for the response.  appreciated Smiley Happy

0 Kudos