cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted

Block HTTPS URL

Jump to solution

Hi,

Using the APP & URL Filtering from R77.30 or R80.10, I can not block HTTPS websites, the Check Point Bypass.

For example, I create a custom App/Sites and add the following site: *.hltv.org

If I type http://www.hltv.org, is block, but If I type https://www.hltv.org it's allowed.

How can I block HTTPS URL?

Thanks.

0 Kudos
1 Solution

Accepted Solutions

Re: Block HTTPS URL

Jump to solution

You need to turn on https inspection to do proper URLF on https. Or you may choose passive filtering based on SSL certificate name:

To enable it, enable the URL Filtering blade:
Go to Application & URL Filtering tab -> Advanced -> Engine Settings -> Enable "Categorize HTTPS sites" and install Security policy

More in sk92743

3 Replies

Re: Block HTTPS URL

Jump to solution

You need to turn on https inspection to do proper URLF on https. Or you may choose passive filtering based on SSL certificate name:

To enable it, enable the URL Filtering blade:
Go to Application & URL Filtering tab -> Advanced -> Engine Settings -> Enable "Categorize HTTPS sites" and install Security policy

More in sk92743

Re: Block HTTPS URL

Jump to solution

Hi Kaspars Zibarts,

Thanks for you reply.

I already had this option selected.

Even with this option enabled, https url are not blocked.

0 Kudos

Re: Block HTTPS URL

Jump to solution

Have you seen this one. I haven't tried but I'm guessing the certificate name most likely is not 100% match with URL. If you are not using https inspection, then there will be trade offs.