cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post

At least one DC is currently disconnected

Jump to solution

Hi.

Check Point cannot connect with one of the domain controllers. Controller is currently in another subnetwork, but permitting policies are created and there is ping from this controller. That could be the problem? Thanks.

0 Kudos
1 Solution

Accepted Solutions
Highlighted

Re: At least one DC is currently disconnected

Jump to solution

permissions needs on DC

View solution in original post

7 Replies
Jerry
Platinum

Re: At least one DC is currently disconnected

Jump to solution

routing or layer-2 vlans Smiley Happy

Jerry
0 Kudos

Re: At least one DC is currently disconnected

Jump to solution

check:

- Routing DC to Gateway and Gateway to DC

- on DC if your WMI service is ok (restart this service if possible)

Re: At least one DC is currently disconnected

Jump to solution

DC was rebooted.  there is still no connection.

0 Kudos

Re: At least one DC is currently disconnected

Jump to solution

adlog a dc command shows  "WMI permission error"

0 Kudos
Highlighted

Re: At least one DC is currently disconnected

Jump to solution

permissions needs on DC

View solution in original post

Re: At least one DC is currently disconnected

Jump to solution
0 Kudos

Re: At least one DC is currently disconnected

Jump to solution

the last prints on DC are about WMI properties...