cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted

mac base client authentication

Jump to solution

Hi,

We have Check point 5800 appliance at our H.O.  There are 50 branch locations connected to H.O through MPLS link. Branch location node/client accessing application from H.O. server through Check point 5800

Query –  Can we configure mac base authentication on Check point 5800 only for valid branch location node/client. Or any other way we can whitelist the known user.

We need to avoid outside/employee home laptop to connect H.O. network

Thank you..

1 Solution

Accepted Solutions
Admin
Admin

Re: mac base client authentication

Jump to solution

We don't support MAC-based authentication, which you would typically find in a NAC solution.

What you can do is use Identity Awareness to only allow machines that are connected to Active Directory (and thus "corporate" machines) to be allowed to access resources.

Create an Access Role and use it in the relevant rules.

1 Reply
Admin
Admin

Re: mac base client authentication

Jump to solution

We don't support MAC-based authentication, which you would typically find in a NAC solution.

What you can do is use Identity Awareness to only allow machines that are connected to Active Directory (and thus "corporate" machines) to be allowed to access resources.

Create an Access Role and use it in the relevant rules.