Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Copper

how do i make a ospf area as Totally-NSSA

how do i make a ospf area as Totally-Not So Stubby area. 

the NSSA options what i see are:

default-cost                  - Configure the default routing cost

default-metric-type           - Configure the default Metric Type

import-summary-routes         - Configure import of Summary LSAs

off                           - Remove the NSSA option from the area

on                            - Configures an area to be an NSSA Area

range                         - Configure a network for the given NSSA

redistribution                - Configure Type 5 LSA output for an area

translator-role               - Configure translation of Type 7 LSAs into Type 5

translator-stability-interval - Configure the Translator Stability Interval (seconds)

i do not see "summary off" like we have in stub.

0 Kudos
3 Replies
Silver

Hi,

Below is my config sample tried on my appliance:

 

set ospf area backbone on
set ospf area 0.0.0.1 on
set ospf area 0.0.0.1 nssa on
set ospf area 0.0.0.1 nssa default-metric-type 1
set ospf area 0.0.0.1 nssa import-summary-routes off

 

Is that suit on your environment?

0 Kudos
Highlighted
Copper

whether this will send the summary default route.

0 Kudos
Highlighted
Silver

Below is the parameter description from admin guide:

nssa import-summary-routes  {on | off} -- Specifies if summary routes (summary link advertisements) are imported into the NSSA.

 

So it's not working?

 

 

 

 
0 Kudos