cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question
Tom_Stala
Nickel

fw_conn_post_inspect Reason: fwconn_key_init_links (OUTBOUND) failed;

We have a VSX setup running R80.10

We have some translation issues that have show very ugly results that have led us to reboot the firewalls.

We have been trying to track down issues with the Firewalls seem to be dropping traffic when going outbound.

There is one program that runs a new lets say test credit card every 45 seconds and it is running 24 hours a day and we have been getting 4 failed communications.

it shows as accepted in the logs but there is no address translations so we run a zdebug forever to fid that it is the firewall dropping communications.

other seen issue

two servers sending an ICMP for monitoring up status.

Server A and Server B behind same IP Hide address

we turned B off

Traffic from A was going out fine and then coming back it was getting translated to B
Rebooted the firewall due to a lot of communication errors and this fixed this issue.

But we are looking for a answer as to what can we do to fix this issue

 fw_conn_post_inspect Reason: fwconn_key_init_links (OUTBOUND) failed;

0 Kudos
2 Replies
Admin
Admin

Re: fw_conn_post_inspect Reason: fwconn_key_init_links (OUTBOUND) failed;

Have you opened a TAC case?

0 Kudos
Tom_Stala
Nickel

Re: fw_conn_post_inspect Reason: fwconn_key_init_links (OUTBOUND) failed;

yes and we found a resolution R80.10 Take_154 solved this issue for us.

Was a translation being dropped for some reason

0 Kudos