cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted
Silver

blink - 6000 series support and JHFA installation

A couple questions around blink imaging:

1. sk120193 doesn't show support for 6000 series appliances.  Is it truly not supported, or is the sk article just not updated?

2. Regarding the images that can be installed via blink:  Is there any way to install a 'base' image [eg. R80.20 (GA Take 101)] and then add offline CPUSE packages to be installed?  Or can blink only install the base images that exist in sk120193, and everything else would have to be done after the fact via CPUSE?  For example, how would I use blink to install R80.20 + JHFA Take 78?

 

0 Kudos
7 Replies
Highlighted

Re: blink - 6000 series support and JHFA installation

As far as I know, we do not have blink image for 6000 series yet. If I am not mistaken, it runs 3.10 kernel, and blink for it is still in works. 

0 Kudos
Highlighted

Re: blink - 6000 series support and JHFA installation

6000 series is still 2.6 kernel.
Only 16k, 26k, cloud and specific open servers are using 3.10 on gateway.
0 Kudos
Highlighted

Re: blink - 6000 series support and JHFA installation

@Norbert_Bohusch could be, let me check with developers then

0 Kudos
Highlighted

Re: blink - 6000 series support and JHFA installation

@Norbert_Bohusch correct, my mistake, mixed with 16k. Chasing R&D to see why 6000 do not have blink. Will update when answered

0 Kudos
Highlighted

Re: blink - 6000 series support and JHFA installation

I assume that there is no blink as 6000 series uses still different images then other appliances (3000, 5000,15000, etc.).
0 Kudos
Highlighted

Re: blink - 6000 series support and JHFA installation

@Norbert_Bohusch you are most probably right. Now, the question is, why 🙂

0 Kudos
Highlighted

Re: blink - 6000 series support and JHFA installation

Hi,

 

Did you ever hear back why?  Will there ever be a blink image for the 6000s in R80.20 (I see that there is one for R80.40)?

 

The OP had also asked about including JHFA's as part of a Blink installation.  I've done plenty of Blink installs with customized commands, but it is not clear to me how to include a JHFA.  Is this possible?

 

Thanks!

0 Kudos