Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

Static Route is not applied

Hi all,

 

We are experiencing an issue with a static routing in our GW R77.30.

We have already a routing for the subnet 192.168.X.X/16 to go through destination A and we have added a new routing for the subnet 192.168.Y.X/24 to go through destination B but the new routing is never applied. All traffic is going through destination A.

We believe that the issue is related with the routed service.

Can anyone assist?

 

Kind Regards,

0 Kudos
2 Replies
Highlighted
Admin
Admin

This should probably be a TAC case.
However, R77.30 is End of Support, so if it is a bug and it's not fixed in the last jumbo hotfix, your only recourse will be to upgrade to a supported version.
0 Kudos
Highlighted

Is the next hop for 192.168.Y.X/24 a valid responding IP address located on a directly-reachable subnet/interface?  If not you can configure the route but it will never be added to the live routing table unless the next hop can be directly and successfully reached; you cannot add a route with a next hop address that is reached through some other router and have it work, the next hop must be local.

R80.40 addendum for book "Max Power 2020" now available
for free download at http://www.maxpowerfirewalls.com
0 Kudos