cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
VENKAT_S_P
Copper

RouteD process util check/monitor

How do i monitor the routeD process utilization:

#################

iso.3.6.1.2.1.25.4.2.1.1.5747 = INTEGER: 5747
iso.3.6.1.2.1.25.4.2.1.2.5747 = STRING: "routed"
iso.3.6.1.2.1.25.4.2.1.3.5747 = OID: ccitt.0
iso.3.6.1.2.1.25.4.2.1.5.5747 = STRING: "-i default -f /etc/routed0.conf -h 0"
iso.3.6.1.2.1.25.4.2.1.6.5747 = INTEGER: 4
iso.3.6.1.2.1.25.4.2.1.7.5747 = INTEGER: 2

#################

which values indicates the util?

could i get exact MIB/OID for it??

4 Replies
VENKAT_S_P
Copper

Re: RouteD process util check/monitor

To add more:

5747 being my PID

0 Kudos
XBensemhoun
Silver

Re: RouteD process util check/monitor

Hi,

The you gave corresponds to (the - conceptual - table of software running on the

host) from the mib (which is a standard and not the proprietary one of Check Point).
At the .7 (iso.3.6.1.2.1.25.4.2.1.7.<your routed PID>) you will have Integer values :
 - 1 for running
 - 2 for runnable
 - 3 for notRunnable
 - 4 for invalid

You should find more information at Net-SNMP.

If you're interested to monitor your Check Point solutions using snmp‌ : you'll find all what you need in the sk90470‌ and sk98552 ( - ).

Every Check Point proprietary OIDs will be found under 1.3.6.1.4.1.2620.

VENKAT_S_P
Copper

Re: RouteD process util check/monitor

seems the OID for routeD is:

.1.3.6.1.4.1.2620.1.5.13.1.2.3.0

SNMPv2-SMI::enterprises.2620.1.5.13.1.2.3.0 = STRING: "routed"

But i do not get one for integer like we have for CPU/Mem, etc

0 Kudos
VENKAT_S_P
Copper

Re: RouteD process util check/monitor

No OID for this.

Confirmed with CP.