cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Danny
Pearl

RAID issue on HP ProLiant DL360 G10

We are experiencing a RAID issue on the new HP ProLiant DL360 G10 servers. Mass Storage Device: HPE Smart Array P408i-a SR Gen10

image.png

Whenever a RAID is configured the GAiA R80.20 for GAiA 3.10 installer fails to identify it and won't let us proceed.
Is anyone else experiencing the same?

As a workaround we deleted the Mirror-RAID to be able to proceed installing Check Point. However, we'd like to enable RAID in order to use both disks for redundancy.

0 Kudos
3 Replies

Re: RAID issue on HP ProLiant DL360 G10

Which version are you trying to install?
0 Kudos
Danny
Pearl

Re: RAID issue on HP ProLiant DL360 G10

0 Kudos

Re: RAID issue on HP ProLiant DL360 G10

Had to ask the version because I could see a symptom like this being the reason older versions aren't supported.

The listing on the HCL definitely suggests it should work. Sounds like time to open a ticket.

Is the RAID card physically part of the motherboard? If not, maybe HP can get you a card which is better-supported. I have a few G9s which were shipped to me with network cards Check Point's ixgbe doesn't support.

0 Kudos