Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
PhongNN
Contributor

PBR with VPN

Hi Mates

Currently I am having a case like the following:

- We have a 5600 Appliance which has 2 external interfaces, one for Inbound traffic with public IP, one for Outbound traffic with private IP.

- We PBR for all DMZ server for Inbound interface, and users access to internet through Outbound interface with normal route.

- We want to Remote Access by Inbound inteface, but cannot. If i change default route in "normal" routing table from Outbound to Inbound, we can Remote Access VPN normally

I'm sure the problem is due to PBR, but is there any solution for remote access by Inbound interface?

Thank you and Best Regards.

0 Kudos
2 Replies
PhoneBoy
Admin
Admin

Have you tried setting the "Link Selection" options here?
I suspect you'll have to adjust one or more of the options here:

Capture.PNG

0 Kudos
PhongNN
Contributor

Hi PhoneBoy

Thanks for your replay

I did it in the begining of deploymentScreenshot_15.png

And this is PBR table

Screenshot_17.png

And this is normal table routing

Screenshot_16.png

When i change the default route to Outbound ( 103.135.28.0/xx is Inbound), the Remote Access was stopped.

 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events