Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Vajram
Explorer

Open Server Cisco UCS 220 M3 GAIA

Hi,

Anyone running Open Server Gaia on Cisco UCS C220 M3?

We are trying to install Gaia open server on Cisco UCS C220 M3, getting i8042 controller  not found.

After move forward to continue the installation getting as attached error.

 

As per below link we tried on raid 1 , but getting same error.

 

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

 

Could you please help on this issue.

 

Early reply will be highly appreciated..!!!!!

 

Regards

Vajram Gajengi

 

0 Kudos
5 Replies
Chris_Atkinson
Employee Employee
Employee

I had a quick look on the HCL and couldn't find the M3 listed.

https://www.checkpoint.com/support-services/hcl/

CCSM R77/R80/ELITE
0 Kudos
John_Fleming
Advisor

What version? My guess is the raid is larger then 2TB? As test recreate raid at 1.9TB and see if it installs. If it does can you use a more recent version? I believe this is addressed with the 3.10 kernel. R80.40 has it other versions you may need a different download. Not sure if this is a gateway or management server.

0 Kudos
PhoneBoy
Admin
Admin

If the hardware isn't on our HCL, there is zero guarantee it will work.
It will never be supported if it's not on the HCL.
If you require support for this hardware, please contact your local Check Point office.
0 Kudos
Nandhakumar
Contributor

I have similar issue but Hardware i am using is UCSC-C240-M5SD. Can you please assist on this. We have similar device working fine in other regions.

0 Kudos
G_W_Albrecht
Legend
Legend

Before ordering HW, please look into https://www.checkpoint.com/support-services/hcl/ if it is supported!

CCSE CCTE CCSM SMB Specialist
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events