Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Christian_Masop
Explorer

Netflow Export suddenly stops working

I've configured and running Netflow Export on my 4600 appliance (R77.30 Take 292).  Since last week it suddenly stopped exporting any data.

fw ctl zdebug drop shows no droped data for the configured collector and fw monitor shows no udp traffic to the configured port.

I've also tried to remove the collector and add it again, no change.

What can be wrong? 

0 Kudos
3 Replies
PhoneBoy
Admin
Admin

Just a hunch, but it's possible a reboot may be necessary to get Netflow working again.

I would engage with the TAC on this so we can get to the bottom of it, though.

Contact Support | Check Point Software 

0 Kudos
Christian_Masop
Explorer

Hi Dameon,
that what I've feared of Smiley Happy   I'd see if I can reboot it during today's maintenance window.

Thanks!

0 Kudos
Christian_Masop
Explorer

Maintenance window has come and passed by without time for a reboot Smiley Sad

But... as sudden as it stopped sending Netflow data as sudden it started again... funny.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events