Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

LOM password reset on 5600 and 12400 appliances

Jump to solution

Hello

 

Can you please suggest if there is an option for LOM password reset? I hound instructions for setting IP, how about resetting LOM Lights Out Management password? 

 

Regards,

Serg

 

References:

sk97849 - Configuring IP Address for LOM card on 21400 appliance through the System Console

sk94670 - Setting Lights Out Management (LOM) IP address from SecurePlatform OS on Power-1 appliance...

 

  1. At the system console port, load the IPMI drivers into Linux memory: 

    [Expert@HostName]# /etc/init.d/ipmi start 

    Should get:
    Starting ipmi drivers: [ OK ] 

    Note: It takes around 20 seconds to load the drivers. 

  2. Check if LOM LAN factory default settings are correct. The bold IP addresses indicated by "<----" are the ones that will be modified. 

    [Expert@HostName]# ipmitool lan print 1
    Set in Progress         : Set Complete
    Auth Type Support       : NONE MD2 MD5 OEM
    Auth Type Enable        : Callback : MD2 MD5 OEM
                            : User     : MD2 MD5 OEM
                            : Operator : MD2 MD5 OEM
                            : Admin    : MD2 MD5 OEM
                            : OEM      :
    IP Address Source       : Static Address
    IP Address              : 192.168.0.100    <----
    Subnet Mask             : 255.255.255.0    <----
    MAC Address             : XXXXXXXXXXXXXXX
    SNMP Community String   : AMI
    IP Header               : TTL=0x00 Flags=0x00 Precedence=0x00 TOS=0x00
    BMC ARP Control         : ARP Responses Disabled, Gratuitous ARP Disabled
    Gratituous ARP Intrvl   : 0.0 seconds
    Default Gateway IP      : 192.168.0.1     <-----
    Default Gateway MAC     : 00:00:00:00:00:00
    Backup Gateway IP       : 0.0.0.0
    Backup Gateway MAC      : 00:00:00:00:00:00
    RMCP+ Cipher Suites     : Cipher Suite Priv Max   : XXXXXXXXXXXXXXX
                            :     X=Cipher Suite Unused
                            :     c=CALLBACK
                            :     u=USER
                            :     o=OPERATOR
                            :     a=ADMIN
                            :     O=OEM
  3. Set the timeout value for the LOM console switch to 59 minutes: 
0 Kudos
1 Solution

Accepted Solutions
Gold

Re: LOM password reset on 5600 and 12400 appliances

Jump to solution

sk120793 => ipmitool user set password 2 vpn123

Or

 sk127573  ipmitool raw 0x2e 0x02 ( Full reset of LOM)

 

View solution in original post

1 Reply
Gold

Re: LOM password reset on 5600 and 12400 appliances

Jump to solution

sk120793 => ipmitool user set password 2 vpn123

Or

 sk127573  ipmitool raw 0x2e 0x02 ( Full reset of LOM)

 

View solution in original post