cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question

How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

I'm having trouble adding a Checkpoint firewall to ISE 2.4. I've been following a blog where the author claims to have successfully added it to ISE 2.1, (here http://mdtnets.blogspot.com/2016/07/checkpoint-gaia-radius-authentication.html).

 

In the part where he gets to "Authentication Policy" I assume it's been replaced by Policy Sets. Running into trouble setting up the conditional "If DEVICESmiley Very Happyevice Type Equals Device Type#All Device Types#Checkpoint"

 

I can do the"if DEVICESmiley Very Happyevice Type Equals: All Device Types" but am not given an option for any other parameters. Am I missing something here?

4 Replies

Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

I think you ask questions concerning Cisco Configuration - but all i know is sk105542...

0 Kudos

Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

Hi,

Device Type "checkpoint" is not there by default. This has to be configured manually. (Out of the head Administration -> Network Resources)

More or less you only enter the IP Address of the Firewall and are then able to differentiate, who is sending the request.

More:

Cisco Identity Services Engine Administrator Guide, Release 2.4 - Manage Network Devices [Cisco Iden... 

Daniel

0 Kudos

Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

John Ejaife (of Spikefish Solutions fame) just wrote up a complete walk through on this. This covers Cisco ISE 2.4 and shows creating a admin role and a noc role. Access is controlled via group membership in active directory.

Checkpoint + ISE + Active Directory integration

0 Kudos
Admin
Admin

Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

I probably should have moved this thread into Appliances and Gaia‌ awhile ago Smiley Happy

0 Kudos