cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question

Gateway crash after execute a command from Clish

Hi All,

Someone has already experienced the following problem:

When executing a simple command via CLISH does the gateway stop processing all requests, being necessary to force a reboot of the gateway?

For example:

Sep 29 11:21:20 2018 PRD-FRW-02 xpand[19155]: Configuration changed from localhost by user admin

### CREATING PBR START ###

Sep 29 11:21:20 2018 PRD-FRW-02 xpand[19155]: Configuration changed from localhost by user admin
Sep 29 11:21:21 2018 PRD-FRW-02 clish[30624]: cmd by admin: Start executing : set pbr ... (cmd md5: 27b56f8c2c398c84d5f271fb1696fd65)
Sep 29 11:21:21 2018 PRD-FRW-02 clish[30624]: cmd by admin: Processing : set pbr rule priority 45 action table VIP (cmd md5: 27b56f8c2c398c84d5f271fb1696fd65)

### CREATING PBR END ###

### CRASH START ###


Sep 29 11:21:21 2018 PRD-FRW-02 xpand[19155]: instance name is [default]
Sep 29 11:21:21 2018 PRD-FRW-02 xpand[19155]: finalize: routed conf file is [/etc/routed0.conf]
Sep 29 11:21:21 2018 PRD-FRW-02 xpand[19155]: finalize: routed instance is [default]
Sep 29 11:21:21 2018 PRD-FRW-02 xpand[19155]: moving /etc/cprd_syntax_test_default to /etc/routed0.conf
Sep 29 11:21:21 2018 PRD-FRW-02 xpand[19155]: Using routed pid 19573 for 'default'
Sep 29 11:21:21 2018 PRD-FRW-02 routed[26616]: NOTICE: task_reconfigure delaying re-init from /etc/routed.conf
Sep 29 11:21:21 2018 PRD-FRW-02 xpand[19155]: admin localhost t +routed:instance:default:pbrrules:priority:45:table 9
Sep 29 11:21:21 2018 PRD-FRW-02 xpand[19155]: Configuration changed from localhost by user admin
Sep 29 11:21:23 2018 PRD-FRW-02 dhcpd: DHCPDISCOVER from d0:04:01:8f:55:87 (android-2ef039bd3b62e9b2) via eth2-03.210
Sep 29 11:21:24 2018 PRD-FRW-02 dhcpd: DHCPOFFER on 10.100.210.66 to d0:04:01:8f:55:87 (android-2ef039bd3b62e9b2) via eth2-03.210
Sep 29 11:21:33 2018 PRD-FRW-02 routed[26616]: NOTICE: task_reconfigure re-initializing from /etc/routed.conf
Sep 29 11:21:33 2018 PRD-FRW-02 routed[26616]: NOTICE: parse_instance_only: my_instance_id -1 parsing instance default
Sep 29 11:21:33 2018 PRD-FRW-02 routed[26616]: NOTICE: task_reconfigure reinitializing done
Sep 29 11:21:36 2018 PRD-FRW-02 xpand[19155]: admin localhost t -volatile:configurationChange
Sep 29 11:21:40 2018 PRD-FRW-02 clish[30624]: cmd by admin: Start executing : save configsa (cmd md5: 0a29d7546a6f586c689ec3f1d47d8b24)
Sep 29 11:21:49 2018 PRD-FRW-02 xpand[19155]: admin localhost t -volatile:clish:admin:30624
Sep 29 11:21:49 2018 PRD-FRW-02 clish[30624]: User admin logged out due to an error from CLI shell
Sep 29 11:21:49 2018 PRD-FRW-02 clish[30624]: Destroying the lists of sensors
Sep 29 11:25:59 2018 PRD-FRW-02 dhcpd: DHCPDISCOVER from d0:04:01:8f:55:87 (android-2ef039bd3b62e9b2) via eth2-03.210
Sep 29 11:26:00 2018 PRD-FRW-02 dhcpd: DHCPOFFER on 10.100.210.66 to d0:04:01:8f:55:87 (android-2ef039bd3b62e9b2) via eth2-03.210

### CRASH END ###

### FORCED REBOOT ###

Sep 29 11:27:56 2018 PRD-FRW-02 shutdown[13286]: shutting down for system halt

Regards

Lucas Piris

0 Kudos
1 Reply
Admin
Admin

Re: Gateway crash after execute a command from Clish

clish commands should not cause this to occur.

Please open a TAC case so we can gather the appropriate information.

0 Kudos