Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Ivory

Firewall Information

Jump to solution

I need to know how to find the following information from my Firewalls:

Serial Number

Mac Address

Firewall Name

Is there a CLI command I can use?

0 Kudos
2 Solutions

Accepted Solutions
Highlighted

Re: Firewall Information

Jump to solution
2 commands, 'show interface Mgmt' as that is on appliances the MAC address that is registered with you gateway.
'cpstat os' this will give you the model and the sertial number of the appliance.
Regards, Maarten

View solution in original post

Highlighted

Re: Firewall Information

Jump to solution

You can show Model, Serial number etc using below command from clish mode.

>show asset system

 

View solution in original post

0 Kudos
5 Replies
Highlighted
Admin
Admin

Re: Firewall Information

Jump to solution
I don't believe serial number is exposed via the CLI.

MAC address is dependent on the interface, and you can see it in clish with show interface eth0 (or whatever interface name).
Note that for entitlement purposes, the MAC address is usually sufficient.

The hostname is shown in the clish prompt, and/or you can use the command show hostname.
This may not correspond to the name of the firewall object in SmartConsole.
0 Kudos
Highlighted
Ivory

Re: Firewall Information

Jump to solution

I will give this a try, thank you!

0 Kudos
Highlighted

Re: Firewall Information

Jump to solution
2 commands, 'show interface Mgmt' as that is on appliances the MAC address that is registered with you gateway.
'cpstat os' this will give you the model and the sertial number of the appliance.
Regards, Maarten

View solution in original post

Highlighted

Re: Firewall Information

Jump to solution

You should also be able to obtain the serial number with show asset all in clish.

Highlighted

Re: Firewall Information

Jump to solution

You can show Model, Serial number etc using below command from clish mode.

>show asset system

 

View solution in original post

0 Kudos