Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Kul
Contributor

Convert Cisco to checkpoint configuration

  • I trying to replace a Cisco device with Checkoint. How do I set the below configuration in checkpoint.

    Your suggestions would be highly appreciated



    interface GigabitEthernet0/0 description Link to Internet + TWAN ip address 172.17.129.246 255.255.255.252 no ip redirects no ip proxy-arp ip wccp web-cache redirect in ip wccp web-cache group-listen ip flow ingress ip nat outside ip virtual-reassembly in load-interval 30 duplex auto speed auto no cdp enable service-policy input url-block-policy service-policy output WEB-BLOCK !
  • interface GigabitEthernet0/1 ip address 172.27.156.1 255.255.252.0 no ip redirects no ip proxy-arp ip nat inside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface
  • GigabitEthernet0/1.2 description LAN_NETWORK TO GEWOG CENTER encapsulation dot1Q 2 ip address 172.26.159.1 255.255.252.0 no ip redirects no ip proxy-arp ip nat inside ip virtual-reassembly in no cdp enable !

 

0 Kudos
0 Replies

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events