cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted
Arun_R
Copper

Can I add three ISP in Redudancy

Dear Team,

Please let me know If I can configure three ISP in redundancy with any mode(i.e Active/Passive/passive (or) load sharing).

If not, Is it any specific reason that I can use to convenience my customer.

- Arun.R

0 Kudos
6 Replies
Admin
Admin

Re: Can I add three ISP in Redudancy

ISP Redundancy does not support more than two links.

0 Kudos

Re: Can I add three ISP in Redudancy

Similar question on embedded, how many internet connections does a 1400 support?

Regards, Maarten
0 Kudos
Admin
Admin

Re: Can I add three ISP in Redudancy

0 Kudos
Arun_R
Copper

Re: Can I add three ISP in Redudancy

Hi Dameon,

Thanks for the update. I am quite confuse with this right now. Yesterday I found this SK article where it quotes to submit RFE in order to gain/increase the ISP redundancy count.

sk112200 - ISP Redundancy support for more than 2 ISP Links

ISP Redundancy support for more than 2 ISP Links

Can you please cross verify it and let me know.

- ArunHari.R

0 Kudos
Admin
Admin

Re: Can I add three ISP in Redudancy

As the product ships, we only support two ISPs for ISP Redundancy.

It's possible that we have provided a customer-specific fix to allow for more.

Customer-specific fixes are usually for specific environments and use cases.

You'll need to work with your local Check Point office/account team for more information.

0 Kudos
Arun_R
Copper

Re: Can I add three ISP in Redudancy

Dear Dameon,

Thanks for the update.

I will take this in further based on the customer requirement.

-Arun.R

0 Kudos