cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted
Ivory

15xxx appliance [GAIA]: Bond with SYNC interface and module interface?

Hi board,

Does anyone knows if following scenario is an option? (Unfortunately, I cannot test in advance)

On a 15xxx appliance, creating a bond interface with 2 interfaces, the physical SYNC interface and another interface located on one of the modules?

Both bond members are 1Gbps/copper.

Is there something special with the SYNC interface which should thwart the bond creation?

Many thanks!

0 Kudos
7 Replies
Highlighted
Ivory

Re: 15xxx appliance [GAIA]: Bond with SYNC interface and module interface?

Nobody an idea?

Thanks.

0 Kudos
Highlighted

Re: 15xxx appliance [GAIA]: Bond with SYNC interface and module interface?

The interface is nothing special, just a different name. There is nothing else that could be in the way to do this.
Regards, Maarten
Highlighted

Re: 15xxx appliance [GAIA]: Bond with SYNC interface and module interface?

Maybe put the question in SMB appliances and SMP ? As this is no GAiA appliance it would make more sense...

And there is something in the way:

sk114217: Bond / Link aggregated interfaces on SMB appliances

We can also find it here, for 1500 :

sk159772: Check Point R80.20 for 1500 Appliances Features and Known Limitations

So, sorry, no way...

0 Kudos
Highlighted
Ivory

Re: 15xxx appliance [GAIA]: Bond with SYNC interface and module interface?

The 15xxx appliances are GAIA appliances. I'm not talking about the 15xx appliances with GAIA Embedded. 😉
0 Kudos
Highlighted

Re: 15xxx appliance [GAIA]: Bond with SYNC interface and module interface?

Oh, i just read Sync Interface - and i did not see that on any appliance up to now except SMBs. But on 15xxx it is also present, so again i have learned something 😎

0 Kudos

Re: 15xxx appliance [GAIA]: Bond with SYNC interface and module interface?

I have been told by TAC that bonding to SYNC isn't supported.

You can run bonded interfaces with SYNC.  You just can't bond the SYNC port.

0 Kudos
Highlighted

Re: 15xxx appliance [GAIA]: Bond with SYNC interface and module interface?

Right. From my experience the SYNC interface behaves just like any other physical interface in GAIA. That is just how GAIA labels the interface. So, you do not have to use that Interface for SYNC traffic. You could use it for any traffic you wanted. If you are using it in this manner, I believe you should be able to use it as a bonded Interface.

To @Tommy_Forrest's point, bonding the interface that carries the SYNC traffic is not supported; regardless of what physical Interface you do it on. 

R80 CCSA / CCSE
0 Kudos