Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Richard_Wieser
Participant

Distribute Remote Access Client from the gateway

Is there a location on the gateway(s) where one can upload a customized Remote Access Client msi so that a user can download via a browser? Not looking to do an automatic upgrade. This would be for 3rd parties that we don't have access to push software to. We currently serve it up on a separate server and send a link. I would rather one location. https://mobileaccess.domaim.com/CheckPointVPN.msi or something similar.

Thanks

0 Kudos
3 Replies
PhoneBoy
Admin
Admin

I guess you can try putting the file in $CVPNDIR/htdocs and see if it can be download this way (through mobileaccess.yourgateway.com/sslvpn/vpn.msi or whatever).
However, that's not supported and is unlikely to survive any sort of an upgrade. 

0 Kudos
Richard_Wieser
Participant

Thanks, tried with a text file and it was a no go. "Error: Access denied. The destination of your request has not been configured, or you do not have authorization to access it. (403)"

0 Kudos
ggiordano
Contributor

from REMOTE ACCESS CLIENTS FOR WINDOWS guide (pag. 35)

Distributing the Remote Access Clients From the Gateway
Use this procedure to distribute an upgrade of the Remote Access Clients from the Security Gateway.
To distribute the Remote Access Clients from the Security Gateway:
1. On the Security Gateway, in the
$FWDIR/conf/extender/CSHELL directory, back up the
TRAC.cab and trac_ver.txt files.
2. Download the Remote Access Clients Automatic Upgrade file for your release from the
Endpoint
Security home page
.
3. Put the new
TRAC.cab and ver.ini files in the same directory on the Security Gateway:
$FWDIR/conf/extender/CSHELL
4. On a non-Windows Security Gateway, run: chmod 750 TRAC.cab
5. Edit the trac_ver.txt file in the directory and change the version number to the number in the new
ver.ini.
6. Make sure the client upgrade mode is set:

Setting Up Remote Access clients
Remote Access clients for Windows Administration Guide | 36
a. Connect with SmartConsole to the Management Server.
b. Open
Global Properties > Remote Access > Endpoint Connect.
c. Set the
Client upgrade mode to Ask user (to let user confirm upgrade) or Always upgrade
(automatic upgrade).
d. Click
OK.
7. Install the policy.
When the client connects to the Security Gateway, the user is prompted for an automatic upgrade of
the newer version.

 

 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events