cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted

Endpoint Security client cannot register to the server.The security ID of this machine was not found

Jump to solution

Hi Team,

Endpoint Server: OPEN

OS: R80.20 

Hotfix: Take_47

Client Package: E80.96 and E81.00

Host Machine OS: Windows 7 Pro (64 bit) , Windows 10 Pro (64 bit), Windows 8 Pro (64 bit)

On Windows 8 Pro: No issue working fine with E80.96 package.

Issue: We face the issue with Windows10 and 7.

We try both client package E80.96 and E81.00 and after installed showing error "Endpoint Security client cannot register to the server. The security ID of this machine was not found"

Could someone address what is the exact issue?

We removed the Third Party Antivirus from Windows 10 and also 7 but still struggling we unable to communicate with Endpoint Server.

Also, what are those dependencies that need to care before installing SBA?

Pls help to resolved this issue.

 

@Chinmaya_Naik 

 

0 Kudos
1 Solution

Accepted Solutions

Re: Endpoint Security client cannot register to the server.The security ID of this machine was not f

Jump to solution

Thanks @Val_Loukine 

I already resolved the issue.

Thanks for the mention that sk83721

On my case, I have Endpoint Server without any domain (Active Directory). I already mention that Windows 8 is working fine but I have an issue with W10 and W7 because of that two testing machine DOMAIN assign already so the Endpoint Client Machine unable to communicate with Endpoint Server.

So I just remove the domain from the W10 and W7 test machine and configure without DOMAIN.

101.pngSTEP 1102.pngSTEP 2103.pngSTEP 3104.pngSTEP 4105.pngSTEP 5

Done 🤗

As per the sk83721: AD is already integrated with Checkpoint Endpoint Server but somehow after installing the Endpoint Agent some machine is unable to connect to Endpoint Server and showing "Disconnect" ["Endpoint client cannot register to the server. Security ID of this machine was not found. Please contact your administrator."]

Solution : 

1. Reset machine from Endpoint Security console.
2. Remove the machine from the domain. (Same as I mentioned above)
3. Add the machine to the domain.

106.pngAdd Domain
4. Force AD sync.

 

@Chinmaya_Naik 

 

0 Kudos
2 Replies

Re: Endpoint Security client cannot register to the server.The security ID of this machine was not f

Jump to solution
0 Kudos

Re: Endpoint Security client cannot register to the server.The security ID of this machine was not f

Jump to solution

Thanks @Val_Loukine 

I already resolved the issue.

Thanks for the mention that sk83721

On my case, I have Endpoint Server without any domain (Active Directory). I already mention that Windows 8 is working fine but I have an issue with W10 and W7 because of that two testing machine DOMAIN assign already so the Endpoint Client Machine unable to communicate with Endpoint Server.

So I just remove the domain from the W10 and W7 test machine and configure without DOMAIN.

101.pngSTEP 1102.pngSTEP 2103.pngSTEP 3104.pngSTEP 4105.pngSTEP 5

Done 🤗

As per the sk83721: AD is already integrated with Checkpoint Endpoint Server but somehow after installing the Endpoint Agent some machine is unable to connect to Endpoint Server and showing "Disconnect" ["Endpoint client cannot register to the server. Security ID of this machine was not found. Please contact your administrator."]

Solution : 

1. Reset machine from Endpoint Security console.
2. Remove the machine from the domain. (Same as I mentioned above)
3. Add the machine to the domain.

106.pngAdd Domain
4. Force AD sync.

 

@Chinmaya_Naik 

 

0 Kudos