VSEC Licensing Allocation

[Amit_Singh4]

CMA version - R80.30, Gateway Version – R80.10

One CMA having two different clusters.

Each Cluster having two gateways in Active Standby mode and each gateway is having four cores enabled.

I have 4 core licenses.

• My Question is – While assigning license, do we need to consider only Active gateway or must be considered standby gateway also?

Active gateway can be mapped with 4 cores license but if we need to consider standby unit then it will need 8 cores license, OR 4 core License will be applicable to both Active & Standby. Could you please confirm about it.

Reference:-

[Expert@ fw-01b:0]# cphaprob stat

Cluster Mode:   High Availability (Active Up) with IGMP Membership

Number     Unique Address  Assigned Load   State

1          X.X.X.1 0%              Standby

2 (local)  X.X.X.2  100%            Active [Expert@fw-01a:0]# cphaprob stat Cluster Mode:   High Availability (Active Up) with IGMP Membership Number     Unique Address  Assigned Load   State 1 (local)  X.X.X.1  0%              Standby 2          X.X.X.2  100%            Active

• My question is which below output needs to be considered while assigning license.

fw ctl multik stat & fw ctl affinity -l -r both commands having different results.

Fw ctl multik results showing number of corexl enabled on gateways and because of that it is showing only 3 cores whereas ctl affinity command showing number of cores enabled on gateway.

[Expert@fw-01a:0]# fw ctl multik stat

ID | Active  | CPU    | Connections | Peak

----------------------------------------------

0 | Yes     | 3      |           7 |       39

1 | Yes     | 2      |           3 |       36

2 | Yes     | 1      |           2 |       35

[Expert@ fw-01a:0]# fw ctl affinity -l -r
CPU 0:  eth0 eth1 eth2 eth3 eth5
CPU 1:  fw_2
mpdaemon vpnd in.asessiond fwd cprid cpd
CPU 2:  fw_1
mpdaemon vpnd in.asessiond fwd cprid cpd
CPU 3:  fw_0
mpdaemon vpnd in.asessiond fwd cprid cpd