Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
natureson
Explorer
Jump to solution

PPPoE connection problem (CP3200)

Hi Mates,

I have a problem with PPPoE connection to ISP on my CP3200 HW appliance. Everything`s work fine on Cisco router with these settings:

interface Dialer1

mtu 1492

ip address negotiated

ip mtu 1480

ip nat outside

encapsulation ppp

dialer pool 1

dialer-group 1

ppp authentication chap callin

ppp chap hostname ******@***

ppp chap password 0 ****

ip virtual-reassembly

interface GigabitEthernet0/0/0.20

encapsulation dot1Q 20

ip address 192.168.*.1 255.255.255.0

ip nat inside

ip tcp adjust-mss 1196 (*non standart value, but provided from ISP and works fine)

ip ospf 1 area 4

ip virtual-reassembly

As you can see we`ve set required parameteres (such as adjust-mss and MTUs) and this is working fine on Cisco router, but i need to connect my ISP connection directly to CP3200. I`ve created PPPoE interface and it is connecting normally but the issue is that clients doesn`t have Web access, only pings (ICMP) works fine. Currently we don`t have any stricts in policy it just set to Allow all, and we use typical ethernet interface facing to Internet everythings work but not with PPPoE. So, how i can adjust mss values on interfaces to make HTTP sessions establishing normally.

 

Thank you very much.

0 Kudos
6 Replies
This widget could not be displayed.

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.