Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
icon Network Security

Part 5 - Gaia WebUI and CLI

In this lecture, we will talk about managing the Operating System of Gaia based Check Point devices, finalize configuration of our Security Gateway, and introduce the Command Line Interface (CLI).

 

Gaia Management Tools

 To function properly, Check Point devices need some OS level settings: IP addresses, routing parameters, DNS, DHCP, SNMP, system updates, and backup settings. OS parameters can be managed either through WebUI or CLI.

 

WebUI

We have already touched the Gaia WebUI during initialization of our lab machines. To access WebUI, open your web browser to https://<device IP address>.

The Gaia WebUI supports the following browsers:

  • Internet Explorer 8 or higher (including IE11).
  • Microsoft Edge
  • Chrome 14 or higher
  • Firefox 6 or higher
  • Safari 5 or higher

You can always check if you browser is supported in SK92668

Let’s connect to our Security Gateway. To do so, open https://192.168.1.254 from your LAB PC or SmartConsole

...;
TO READ THE FULL POST it's simple and free