cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Pantsu
Iron

HTTPS inspection

Jump to solution

hello

my checkpoint works as proxy server with https inspection . 
 I changed ip address of proxy in client machine side (set up another ip address of gateway)   everything works but ,  HTTPS Inspection doesnot works , when i back the old ip, it works.
 I think HTTPS inspection is not active for the new ip address, how i can solve this problem ? 

 

 

thankyou

1 Solution

Accepted Solutions

Re: HTTPS inspection

Jump to solution

Hi @Pantsu 

If you are using the firewall as explicit proxy, you have to set your gateway object or cluster object  as destination in the https interception rule. 

Here "internet" should not be used as destination. 

Then it should work.

Tags (1)
3 Replies
Highlighted
Admin
Admin

Re: HTTPS inspection

Jump to solution

How is this screen configured?

Screen Shot 2019-09-06 at 2.47.47 PM.png

Pantsu
Iron

Re: HTTPS inspection

Jump to solution
I have a specific interface selected and have specific ip addresses, i think it is also true. but it doesnot inspect traffic and in client side it doesnot use certificate , when i use old ip address than it is working.
0 Kudos

Re: HTTPS inspection

Jump to solution

Hi @Pantsu 

If you are using the firewall as explicit proxy, you have to set your gateway object or cluster object  as destination in the https interception rule. 

Here "internet" should not be used as destination. 

Then it should work.

Tags (1)