cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post

AD and Firewall integration

Hi,

One of our customer has Bluecoat proxy(for bandwidth management + URL filtering) and Palo alto(Application fw + IPS)firewall in their network. Network flow  LAN users -->AD server -->Bluecoat proxy --> Palo alto firewall -->Internet.

Customer want to remove Bluecoat proxy and enable the same features on Palo alto firewall. But after AD integration with Palo alto fiewall - Distributed COM Users, Event Log Readers and Server Operators - these groups are not sync. Due to that even if system admin made changes in the AD user group that change is not reflecting in Palo alto user group.

In existing setup Bluecoat proxy perfectly working fine with AD user group sync.

Customer will not change any setting for the Distributed COM Users, Event Log Readers and Server Operators groups.

Now customer asked, If we replace Bluecoat proxy with Checkpoint URL filtering feature + AD integration, will it work?

Please suggest...

Thank you....

Tags (1)
8 Replies

Re: AD and Firewall integration

I assume that you by "AD Integration" you mean Identity awareness Software Blade.

To answer your question on whether it will work or not, one needs to see the exact use case. Most probably it will, but it is best to address this question to your local Check Point office or a relevant reseller, so they could look into details and advise.

Re: AD and Firewall integration

I support Symantec (Bluecoat) SG proxys for many of our customers. From my point of view, you can't replace a Symantec SG with a Check Point. Even though I think Check Point is very good product, as a proxy it can't be compared to a Symantec SG.

If you intend to do that, you should do a POC.

See Migrating the Functionality of a dedicated Proxy Server to Check Point

or  How to configure Check Point Security Gateway as HTTP/HTTPS Proxy discussion.

 

 

 

Re: AD and Firewall integration

Currently no support for:

- TLS 1.3

- SNI

Only available with R80.30EA and above.

Re: AD and Firewall integration

It would be a good solution to use the TEX appliance from Check Point with a Symantec (Bluecoat) SG.

More see here:
Symantec (Bluecoat) SG ICAP and Sandblast (TEX)

Re: AD and Firewall integration

But always do a POC and speake with your locale Check Point SE.

Re: AD and Firewall integration

Yes. We will do POC to test the required features but before that customer want to know - Can Checkpiont firewall active sync with AD groups or is their any AD group dependency(already mentioned AD group name) as like Palo alto firewall.

Re: AD and Firewall integration

Yes. We will do POC but before that customer want to know - is their AD group dependency as like Palo alto in Checkpoint or not.
Wolfgang
Silver

Re: AD and Firewall integration

If you mean the Palo Alto problem with adding users to a group in ActiveDirectory and this new users does not appear on the PAN-device... With Check Point this works, you add a user via ActiveDirectory to an AD-group and Check Point device knows this membership.

Wolfgang