cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Aathi
Nickel

config_system-Post installation parameters change

Jump to solution

Hi Team,

 

name: "Create config_system on the gateway"
command: config_system --config-string "hostname=myhost&domainname=nnm.com&timezone='America/Indiana/Indianapolis'&ftw_sic_key=aaaa&install_security_gw=true&gateway_daip=false&install_ppak=true&gateway_cluster_member=false&install_security_managment=false"

 

Once we run this command in CLI, configuration is completed and the Gateway is rebooting automatically, is there any way to stop the gateway from reboot and do it manually or after sometime.

 

name: "Create config_system on the gateway"
command: config_system --config-string "hostname=myhost&domainname=nnm.com&timezone='America/Indiana/Indianapolis'&ftw_sic_key=aaaa&install_security_gw=true&gateway_daip=false&install_ppak=true&gateway_cluster_member=false&install_security_managment=false&reboot_if_required=false"

Can we use like above command .Please help on this

 

 

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Admin
Admin

Re: config_system-Post installation parameters change

Jump to solution

A reboot is required for the results of config_system to take effect. Can you please explain why you you don't want it to reboot?

View solution in original post

0 Kudos
1 Reply
Highlighted
Admin
Admin

Re: config_system-Post installation parameters change

Jump to solution

A reboot is required for the results of config_system to take effect. Can you please explain why you you don't want it to reboot?

View solution in original post

0 Kudos