topic Re: Get Network Topology in Spark Firewall (SMB)

Get Network Topology

Matlu — Mon, 04 Dec 2023 17:44:22 GMT

Hello,

In SMB 1570 Check Point devices, when you have the appliances managed from an SMS, to get the correct topology of the interfaces in the SMB object, is it advisable to use the "get interface" or use the "get interface with topology"?

My LAN does not appear in the topology of the object that is in the SMS, and I think it is "indispensable" that it appears, right?

The "get interface" is what on larger appliances would be the "get interface without topology"?

Greetings.

Re: Get Network Topology

the_rock — Mon, 04 Dec 2023 20:25:29 GMT

Bro, ALWAYS without topology, as with will reset the topology settings to default values.

Andy

Re: Get Network Topology

Matlu — Mon, 04 Dec 2023 21:01:15 GMT

I wanted to confirm, if in these SMB devices, the "get interfaces" option is what appears in the big boxes as "get interface without topology".

Re: Get Network Topology

the_rock — Mon, 04 Dec 2023 22:13:16 GMT

Correct bro.

Andy

Re: Get Network Topology

Matlu — Mon, 04 Dec 2023 23:10:07 GMT

A query,

If I have a WAN interface, with the network 192.168.1.x/24

And the SMB is "Centrally managed".

When I open the SMB object from the SmartConsole, in the "Topology" section, is it "indispensable" that I see the LAN Interface?

If I don't see it, can it be "causing" problems?

Re: Get Network Topology

the_rock — Mon, 04 Dec 2023 22:50:23 GMT

Its one you highlighted, thats the right interface.

Re: Get Network Topology

Matlu — Mon, 04 Dec 2023 23:11:10 GMT

It seems to me that the "Topology" from the SmartConsole, is not "updated" as it is in the SMB.

I don't see the correct WAN IP in the "Topology".

inet 192.168.1.26/24 brd 192.168.1.255 scope global WAN
inet 192.168.82.1/24 brd 192.168.82.255 scope global LAN1

It would be good to update the "Topology" from the SmartConsole, right?
So that the information matches.

Re: Get Network Topology

the_rock — Mon, 04 Dec 2023 23:20:25 GMT

yes