topic Re: Doctor Spark CLI commands in Spark Firewall (SMB)

Doctor Spark CLI commands

G_W_Albrecht — Fri, 11 Aug 2023 10:54:16 GMT

It is easy to generate a Doctor Spark report in the WebGUI. And what about moments this is not possible ? Since R80.10.05, also Embedded GAiA CLI has Doctor Spark integrated: https://sc1.checkpoint.com/documents/SMB_R81.10.X/CLI/EN/Content/Topics/drsmb.htm It will perform the same tests, not producing a html page, only simple logfiles.

But the given syntax is incorrect - drSMB has to be called instead:

Usage: drSMB diag <list | verify | print | performance | last_run | light> 

Options: 
-------- 
drSMB diag list [[TestId1],[TestId2]..|[SectionName]] - Display verifiers 
drSMB diag verify [except] [[TestId1],[TestId2]..|[SectionName]] - Run verifiers and display report 
drSMB diag print [except] [[TestId1],[TestId2]..|[SectionName]] - Run verifiers and display verbose output 
drSMB diag last_run <verify | print> - Display latest report/verbose output 
drSMB diag performance <time in sec> - Run only performance test, time for throughput and packet rate. if no time is given will run for 10 sec. 
drSMB diag light - Run only the tests that takes short time to run. 

SectionName Options: 
< General | Policy_and_Configuration | VSX_Configuration | Status | Sizing | Memory | Connectivity | Performance | Cluster | Reach_My_Device | SMP | OS | License | Cellular | VPN | Hardware >

Only the first three diag types are listed in the CLI Guide, Sectionname Options are also missing.

# drSMB diag print 
2023-08-11_12-46-29
==============================
Core Dumps:
==============================
Checking for userspace core....
Userspace core was not found.
==============================
Kernel Panics:
==============================
Checking for kernel panics....
No kernel panics on the current software version

After finishing the tests, a summary is displayed:

-------------------------------------------------------------------------------------------------                                                                                                                  
| Tests Summary                                                                                 |                                                                                                                  
-------------------------------------------------------------------------------------------------                                                                                                                  
| Passed: 87/91 tests, 5 of them info, 4 of them warning, and 35 of them N/A.                   |                                                                                                                  
| Run: "drSMB diag list 9,14,33,88" to view a complete list of failed tests.                    |                                                                                                                  
| Output file: /storage/doctor_smb/tempfiles/verifier_sum.1-91.2023-08-11_12-43-48.txt          |                                                                                                                  
-------------------------------------------------------------------------------------------------

Re: Doctor Spark CLI commands

the_rock — Fri, 11 Aug 2023 14:25:27 GMT

Thanks for sharing!

Andy

Re: Doctor Spark CLI commands

G_W_Albrecht — Mon, 14 Aug 2023 08:58:00 GMT

I would not expect much with some options, though 8)

drSMB diag print VSX_Configuration

2023-08-14_10-36-02

-------------------------------------------------------------------------------------------------

| Tests Status |

-------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------

| Tests Summary |

-------------------------------------------------------------------------------------------------

| Passed: 0/0 test, 0 of them info, 0 of them warning, and 0 of them N/A. |

| Output file: /storage/doctor_smb/tempfiles/verifier_sum..2023-08-14_10-36-02.txt |

-------------------------------------------------------------------------------------------------

Re: Doctor Spark CLI commands

ohadp — Mon, 04 Dec 2023 08:17:13 GMT

We have also

drSMB diag light

All tests defined as heavy or light, light (less than 1 second), so the dr. will run fast.
Also, you can run the light via Web-UI with night job (configuration) at 2 AM.

Re: Doctor Spark CLI commands

G_W_Albrecht — Mon, 04 Dec 2023 10:20:51 GMT

Yes, it was included in my post:

drSMB diag light - Run only the tests that takes short time to run.

Scheduling would be nice. and why hide it...

Also to switch to full doctoring appreciated.