topic Re: Command "enabled_blades" on embedded Gaia in Spark Firewall (SMB)

Command "enabled_blades" on embedded Gaia

Bernhard_Sayer — Fri, 11 Jan 2019 14:26:49 GMT

Hi!

Is there a command to check enabled blades on embedded Gaia appliances?

BR,

Bernhard

PhoneBoy — Sat, 12 Jan 2019 20:48:19 GMT

As far as I know, there is no equivalent to enabled_blades on SMB.

HristoGrigorov — Sun, 13 Jan 2019 14:33:42 GMT

It was planned but not implemented. I mean when you do clish -c "show configuration" you will see:

# Table for activation status of a blade

and then nothing...

G_W_Albrecht — Mon, 14 Jan 2019 10:51:40 GMT

It is present as text files:

Blades status and licensing: expert# cat /opt/fw1/conf/blades.xml

Blades enabled (1) / disabled (0): expert# cat/opt/fw1/conf/active_blades.txt

Bernhard_Sayer — Mon, 14 Jan 2019 11:46:51 GMT

Perfect - Thanks!

HristoGrigorov — Mon, 14 Jan 2019 11:53:43 GMT

So, if you want to have your own version of enable_blades put this into a script:

grep 1 /opt/fw1/conf/active_blades.txt | awk '{print $1,$3}'

Bernhard_Sayer — Mon, 14 Jan 2019 11:59:36 GMT

or use this if you want the output in one line:

grep 1 /opt/fw1/conf/active_blades.txt | awk '{print $1,$3}' | tr -d '\n'