topic Re: CP Standalone NAT - Different Public IP for a different private subnet in Spark Firewall (SMB)

CP Standalone NAT - Different Public IP for a different private subnet

mike94 — Thu, 03 Aug 2023 10:05:06 GMT

Hi,

This is most likely my first post here, so apologise if I have published it under the wrong location.

I have a public subnet that has multiple public IP addresses. What I would like to do is to configure NAT in such a way, so it gives a different public IP address for two of my private subnets.

Is this possible to achieve on a standalone firewall(Quantum Spark
1550 Appliance)?

Re: CP Standalone NAT - Different Public IP for a different private subnet

_Val_ — Thu, 03 Aug 2023 10:41:45 GMT

No worries, we moved it where it belongs

Re: CP Standalone NAT - Different Public IP for a different private subnet

mike94 — Thu, 17 Aug 2023 15:47:08 GMT

Any ideas please?

Re: CP Standalone NAT - Different Public IP for a different private subnet

G_W_Albrecht — Tue, 22 Aug 2023 09:56:53 GMT

As this works with internal servers, just try to do manual NAT rules.