topic Re: 1490 appliance in Spark Firewall (SMB)

1490 appliance

Ervin_Gaju — Fri, 12 Jan 2018 08:04:19 GMT

Hello
I'm new to checkpoint appliances and i'm a bit confused right now.
A client wanted to change his firewall brand from barracuda to checkpoint. A 1490 appliance was shipped to us based on our requirement.
i have two questions:
1) can i use smartdashboard? if not, why? the appliance come with a manual named centrally managed.
2) i have 6 different public ip addresses which need to be assigned to 6 different internal server(publish to outside) can we do it on the 1490?

Grateful if you can let me know if we can further talk on skype.

thank you

Ervin

Re: 1490 appliance

PhoneBoy — Fri, 12 Jan 2018 15:00:54 GMT

SmartDashboard talks to a management appliance (either Smart-1 or Open Server).

This is an extra cost and unless you've purchased it, you cannot use SmartDashboard.

That said, the web interface on the 1490 is very capable.

You should be able to NAT your six public IPs to different servers behind you 1490.

If you're looking for a personal consult, I recommend talking with your local Check Point SE.

If you need help locating them, let me know.

Re: 1490 appliance

Pedro_Espindola — Fri, 12 Jan 2018 17:06:08 GMT

Search for the R77.20.70 1400 Appliance local admin guide.

The R77.20.70 CLI Admin Guide might also help.

Re: 1490 appliance

Pablo_Barriga — Fri, 12 Jan 2018 20:02:41 GMT

Hello the standalone interface is quite good, also the Nat configurations

Re: 1490 appliance

Ervin_Gaju — Tue, 23 Jan 2018 08:33:40 GMT

Hello Dameon,

Thank you for your reply.

concerning the six public ip addresses, can you please advise how to add the other public addresses on the WAN interface?

i shall be grateful if i can get a contact too.

Re: 1490 appliance

Ervin_Gaju — Tue, 23 Jan 2018 08:33:50 GMT

thanks..

Re: 1490 appliance

Ervin_Gaju — Tue, 23 Jan 2018 08:34:51 GMT

Hello Pablo,

thank you

the natting part is okay. i would like to know how to assign the public ip addresses to my wan port so that i may proceed to the NAT.

Re: 1490 appliance

Pablo_Barriga — Tue, 23 Jan 2018 20:23:12 GMT

Hello all Internet configurations can have the NAT hide option or you can configure manually all the NAT assignation

Re: 1490 appliance

PhoneBoy — Sat, 27 Jan 2018 06:36:14 GMT

You can simply create a server object for the relevant host and specify the public IP address you wish to use:

For the firewall's external IP, you may need to use manual NAT rules as Pablo suggested.