topic 1800 HA PSU LED in Spark Firewall (SMB)

1800 HA PSU LED

G_W_Albrecht — Fri, 31 Mar 2023 08:32:21 GMT

In https://sc1.checkpoint.com/documents/Appliances/GSG_V2V3/EN/Content/Topics-V2-V3/Front-Panel.htm?tocpath=Appliance%20Diagrams%20and%20Specifications%7C_____1, we read about the front LEDs of the 1800:

Now the red LED for Power redundancy will only light if only one PSU is connected, but is off if Power redundancy is available - we can see the status of Power redundancy in cpview:

On the front LEDs the Power redundancy LED is off and everything is OK:

It seems that the Quantum Spark 1600 / 1800 Appliance Getting Started Guide is slightly incorrect here 8)

Re: 1800 HA PSU LED

Chris_Atkinson — Fri, 31 Mar 2023 10:01:29 GMT

Thanks - Did you already submit feedback to the Tech Pubs link/address in the same guide?

Re: 1800 HA PSU LED

G_W_Albrecht — Fri, 31 Mar 2023 10:13:19 GMT

Yes 😉

Re: 1800 HA PSU LED

Sergei_Shir — Sun, 02 Apr 2023 20:58:28 GMT

We are checking and will update the documentation as required

Thank you for this feedback

Re: 1800 HA PSU LED

Sergei_Shir — Thu, 20 Apr 2023 14:55:39 GMT

The Getting Started Guide was updated:

Link:

https://sc1.checkpoint.com/documents/Appliances/GSG_V2V3/EN/Content/Topics-V2-V3/Front-Panel.htm

Updated text:

Power redundancy - Shows the status of the two internal PSUs. Single red LED.
- The two Power Supplies are active - Off
- Failure in one of the Power Supplies - On