topic Re: Remote Access VPN to DMZ in Spark Firewall (SMB)

Remote Access VPN to DMZ

brizio1971 — Tue, 06 Dec 2022 23:14:59 GMT

HI,

I have configure Remote Access VPN on my 1550 appliance, on this firewall I have configure a LAN (10.1.0.0/24) on Ethernet 1 port and a DMZ (192.168.200.0/24) on Ethernet 2 port.

The VPN work correctly from laptop using Endpoint VPN connection and I can access to alle LAN device but Im not able to connect the DMZ device, why ?

There are any particular configuration to connect from VPN to DMZ ?

Thanks

Fabrizio

Re: Remote Access VPN to DMZ

PhoneBoy — Tue, 06 Dec 2022 23:40:01 GMT

What precisely happens when you try to connect to the DMZ over VPN?
What, if anything, shows up in the logs when this occurs?
If you investigate the routing table on the VPN client, do you see a route for the DMZ present?

By default, this should be allowed…assuming you haven’t changed certain default configurations (like the encryption domain).
If you’re using a Strict access policy, you might need an explicit rule to permit such communication.

Re: Remote Access VPN to DMZ

brizio1971 — Wed, 07 Dec 2022 14:20:59 GMT

Issue solved was a cable problem, thx