topic Re: Why isn't the PTM over VDSL/ADSL option visible? in Spark Firewall (SMB)

Why isn't the PTM over VDSL/ADSL option visible?

Stuart_Green — Fri, 17 Aug 2018 14:47:53 GMT

I'm currently wanting to change the configuration on an internet connection and need to configure a VLAN. I'm logging in externally through the SMP. I can't see the PTM over VDSL/ADSL option as there's nothing there.

When I originally set the connection up on another, the tick box option and text box WAS there. Same firmware, same model. I even took a screenshot of it - see attached.

Can anyone shed any light on to when this tick box actually appears? Is it only when connected on an internal interface or is it linked to the connection that the DSL modem has?

TIA,

Re: Why isn't the PTM over VDSL/ADSL option visible?

_Val_ — Mon, 20 Aug 2018 11:21:16 GMT

Please make sure you have the updated firmware. More details here: R77.20.75 for Small and Medium Business Appliances

Re: Why isn't the PTM over VDSL/ADSL option visible?

Stuart_Green — Mon, 20 Aug 2018 12:21:12 GMT

Check Point latest is the setting on the SMP.

Best Regards,

Stuart

Stuart Green

CESG Certified Professional

Re: Why isn't the PTM over VDSL/ADSL option visible?

_Val_ — Mon, 20 Aug 2018 13:28:12 GMT

Could you please list both SMP and GW software versions?

Re: Why isn't the PTM over VDSL/ADSL option visible?

Stuart_Green — Mon, 20 Aug 2018 15:13:17 GMT

SMP is Check Point-hosted R12.30 and gateway is R77.20.80_990172392.

Best Regards,

Stuart

Stuart Green

CESG Certified Professional

Re: Why isn't the PTM over VDSL/ADSL option visible?

_Val_ — Mon, 20 Aug 2018 15:29:11 GMT

Thank Stuart Green‌

R12.30 is released in 2017, before PTM started to be supported in the GW firmware. I would ask you to do the following:

1. If you can, please check that you have PTM available on GW direct WebUI. It should.

2. For SMP, please open a support request

Re: Why isn't the PTM over VDSL/ADSL option visible?

Stuart_Green — Mon, 20 Aug 2018 17:09:06 GMT

This was on gateway direct WebUI...

I’ll raise a ticket for the SMP. It has had a few issues of late.

Best Regards,

Stuart

Stuart Green

CESG Certified Professional

Re: Why isn't the PTM over VDSL/ADSL option visible?

G_W_Albrecht — Tue, 21 Aug 2018 09:32:35 GMT

I would suggest to try a complete USB Firmware install following sk98549 / sk107592. I have had strange issues in the past (up to grave nonsense like DHCP not working) that have been resolved after the procedure (or showed faulty hardware leading to RMA).