topic Re: help with 730 appliance in Spark Firewall (SMB)

help with 730 appliance

eshai — Wed, 26 Jan 2022 02:34:41 GMT

hi: I'm not an expert just a noob

I'm using 730 appliance 20.87 Gaia

I have a controller that is connected to my network

I contact it with dhcp it got 192.168.1.14

the controller is web interface port 80

is there a way to make it web server and concoct it from my home

I'm using a fix ip

Chris_Atkinson — Wed, 26 Jan 2022 23:49:24 GMT

the_rock — Thu, 27 Jan 2022 00:12:56 GMT

Can you upload a screenshot of the nat rule you created to the original post?

Andy

eshai — Thu, 27 Jan 2022 20:46:27 GMT

the_rock — Thu, 27 Jan 2022 21:22:13 GMT

That should be fine...so what happens when you try? Do you see logs in the firewall for your source IP?

eshai — Thu, 27 Jan 2022 21:25:23 GMT

no logs

i'm watching it

the_rock — Thu, 27 Jan 2022 21:28:20 GMT

Im not sure than, sorry...without being able to see for myself, its hard to guess. I would contact TAC and see if they can double check it for you.

eshai — Thu, 27 Jan 2022 21:33:59 GMT

just to clear it up my 730 appliance is connected as dhcp to another router

i'm trying to connect device controller for the hvac that have a browser interface (por 80)

sorry if my English is not so good

Chris_Atkinson — Fri, 28 Jan 2022 00:53:02 GMT

What do the corresponding rules look like in the inbound access / firewall policy?

Do you see anything with tcpdump when you filter for the designated source address?

Chris_Atkinson — Fri, 28 Jan 2022 00:56:14 GMT

If it were me I probably wouldn't just be using NAT to expose my HVAC and opting for a more secure route.

eshai — Fri, 28 Jan 2022 01:18:29 GMT

i get udp/1900 & udp/138

that in the log (wan)

Chris_Atkinson — Fri, 28 Jan 2022 09:50:08 GMT

In this case you need to investigate where the port 80 traffic is stopped.