topic Re: Do SMB Appliances have limited SNMP functions in Spark Firewall (SMB)

Do SMB Appliances have limited SNMP functions

morris — Fri, 12 Jan 2018 10:49:25 GMT

Hi there,

we want to monitor the VPN-tunnel state of a S2S-tunnel of a 1100 SMB with SNMP.

Regarding to the Best-Practice Guide and sk63663 the OID is

1.3.6.1.4.1.2620.500.9002.1.3

After many tries I started a snmpwalk.
But there is no output with "snmpwalk 1.3.6.1.4.1.2620.500"

I couldn't check the OID with a fullsize Appliance. So the question I aks myself is:

Do SMB Appliances have limited SNMP functions?

Best regards,

Re: Do SMB Appliances have limited SNMP functions

PhoneBoy — Sat, 13 Jan 2018 01:49:33 GMT

The only limitation I am aware of on these appliances is the inability to create custom OIDs: Cannot create custom OID on Check Point 600 / 700 / 1100 / 1200R / 1400 SMB Appliances

I recommend engaging with the TAC: Contact Support | Check Point Software

Re: Do SMB Appliances have limited SNMP functions

David_C1 — Wed, 07 Feb 2024 21:52:21 GMT

I found this thread while fighting with snmp on a centrally managed 1570R running R81.10.08. The same problem still exists, trying to pull anything in .1.3.6.1.4.1.2620.500 fails.

Just a little frustrating.

Dave