topic Re: DHCP-Reservation missing in SMB appliance in Spark Firewall (SMB)

DHCP-Reservation missing in SMB appliance

skandshus — Fri, 27 Aug 2021 06:54:13 GMT

Has anybody seen this issue before?

check attached photos.

i've got 2 SMB appliances working fine with DHCP reservation option available.

Now i am preparing a 3rd device, but the option to dhcp-reserver when creating an object is missing for me all of the sudden.

Re: DHCP-Reservation missing in SMB appliance

796570686578 — Fri, 27 Aug 2021 07:34:29 GMT

What Version do you have installed on the gateways? Is it possible that the new SMB Appliance is on an older Software version and therefore doesn't have the future yet?

Re: DHCP-Reservation missing in SMB appliance

PhoneBoy — Mon, 30 Aug 2021 05:10:05 GMT

That feature has been there from the beginning.
That said, you may want to make sure you're on the latest firmware: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk173185&partition=Basic&product=Quantum
Are you following the exact same procedure on all three appliances?

Re: DHCP-Reservation missing in SMB appliance

G_W_Albrecht — Mon, 30 Aug 2021 12:11:02 GMT

This is a bug in R80.20.30 - contact TAC and request firmware R80.20.30 Build 992002349 where this is fixed !

Re: DHCP-Reservation missing in SMB appliance

skandshus — Mon, 30 Aug 2021 20:04:34 GMT

I am/was in 80.20.30 apparently a hot fix I received to fix an issue just created another problem.. also coinciding with the hot fix, was that it was causing remote access and site to site vpn to drop after some hours of operation causing a need for reboot..

I reset the appliance and went back to 80.20.15 instead..

Re: DHCP-Reservation missing in SMB appliance

skandshus — Mon, 30 Aug 2021 20:05:26 GMT

I don’t have the courage to keep

upgrading with hot fixes.

though I’m surprised they haven’t pulled the upgrade..

Re: DHCP-Reservation missing in SMB appliance

G_W_Albrecht — Tue, 31 Aug 2021 07:09:07 GMT

You still can define such objects using CLI, but you can not edit them in WebGUI.