topic Re: Check Point 1550 in Spark Firewall (SMB)

Check Point 1550

babicmilan — Tue, 09 Feb 2021 12:12:03 GMT

Hello, I have last firmware "fw1_vx_dep_R80_992001844_20.img" installed on my CP 1550. I noticed that firewall reboots after some period of time. Crash logs in attachment.

Re: Check Point 1550

Chris_Atkinson — Tue, 09 Feb 2021 12:21:47 GMT

Please try upgrading to Build 1869 from sk170534 and advise if the problem persists.

Re: Check Point 1550

Amir_Ayalon — Tue, 09 Feb 2021 12:35:35 GMT

thanks

we are looking into it

Re: Check Point 1550

babicmilan — Tue, 09 Feb 2021 12:44:18 GMT

OK, thanks.

I will try to upgrade it to the last Build 1869.

In general, I had a lot of problems with this device. In some builds before for example some services stops working (Remote Access VPN, incoming emails). When problem happened, I had to reboot device. After reboot, it works some period of time and problem happened again.

Re: Check Point 1550

Amir_Ayalon — Tue, 09 Feb 2021 12:44:57 GMT

It’s an IMAP inspection issue which is solved in B1869

Re: Check Point 1550

babicmilan — Tue, 09 Feb 2021 15:44:16 GMT

Hello,

I have two Check Point 1550 devices and Site to Site VPN tunnel between them. After upgrade to Build 1869, Site to Site stop working so I had to downgrade image to "fw1_vx_dep_R80_992001844_20.img"

I have Route Based VPN implemented.

Best Regards,

Milan Babic

Re: Check Point 1550

PhoneBoy — Wed, 10 Feb 2021 04:50:31 GMT

I recommend a TAC case here to make sure we identify and solve the issue.

Re: Check Point 1550

babicmilan — Fri, 12 Feb 2021 23:22:55 GMT

Here is crash logs from another CP 1550.

As a workaround I have disabled IMAP inspection.

Best Regards,

Milan Babic

Re: Check Point 1550

Amir_Ayalon — Mon, 15 Feb 2021 07:58:04 GMT

the IMAP issue is known and solved on 1869

as for the Site to Site VPN - After upgrade to Build 1869, Site to Site stop working

please open TAC case

thanks