topic Re: L-50W after restoring to factory settings does not start in Spark Firewall (SMB)

L-50W after restoring to factory settings does not start

PiotrN — Wed, 07 Oct 2020 20:25:00 GMT

Hello,

I have a problem, because the L-50 W does not start after restoring to the factory settings.

I have situations:
power - continuous green
Notice - blinking green

According to the instructions, the router is booting up ... but is unable to boot

am I able to rescue the router in some way?

Regards

Piotr

Re: L-50W after restoring to factory settings does not start

PhoneBoy — Wed, 07 Oct 2020 22:13:59 GMT

It's probably the same issue as here (with the same fix): https://community.checkpoint.com/t5/SMB-Appliances-and-SMP/error-after-reset-L-50WD/m-p/61683#M2363

Re: L-50W after restoring to factory settings does not start

PiotrN — Thu, 08 Oct 2020 07:39:13 GMT

Thank you, i will try to get the latest firmware somehow ....
I wrote to support, we'll see if they help in such a situation ..

Regards

Re: L-50W after restoring to factory settings does not start

G_W_Albrecht — Thu, 08 Oct 2020 08:10:30 GMT

The lastest firmware can be found here: sk165875: Check Point Response to CVE-2020-8597 (PPP buffer overflow vulnerability)

The firmware before can be found here: R77.20 HFA 80 (R77.20.80) Build 990172487 for 600/1100 Appliances

Re: L-50W after restoring to factory settings does not start

PiotrN — Thu, 08 Oct 2020 08:36:08 GMT

Thank you very much for your help, but unfortunately I have no download access ....
Regards

Re: L-50W after restoring to factory settings does not start

G_W_Albrecht — Thu, 08 Oct 2020 08:54:05 GMT

If you have Support, just ask for it.

Re: L-50W after restoring to factory settings does not start

PiotrN — Thu, 08 Oct 2020 09:04:14 GMT

Unfortunately, I have no support, I got the equipment home from a friend, I understand that in this case I have to give up attempts to start of the device
Regards