https://community.checkpoint.com/t5/Spark-Firewall-SMB/Flow-Control-on-SMB-Appliances/m-p/97687#M4179 <P>Not for Ethernet, only for Serial ! This can be done on <STRONG class="menuoptions">Device</STRONG> &gt; <STRONG class="menuoptions">Advanced Settings</STRONG> page - see under&nbsp;<STRONG>Serial port</STRONG> in Check Point 700/900 Appliances Administration Guide R77.20.87 p.93 ! Also Check Point 700/900/1400 Appliance CLI Technical Reference Guide R77.20.87 p.214.</P> Mon, 28 Sep 2020 08:24:50 GMT G_W_Albrecht 2020-09-28T08:24:50Z https://community.checkpoint.com/t5/Spark-Firewall-SMB/Flow-Control-on-SMB-Appliances/m-p/97684#M4178 <P>Hi Checkmates,</P><P>&nbsp;</P><P>I have here a SMB appliance 770 running on R77.20.87 and i want to check or config/enable the flow control settings on the interfaces. It seems that commands like ethtool is now working on interfaces unlike 1500 series running on r80.20.10 embedded gaia</P><P>&nbsp;</P><P>is there another way to do it via clish? or enable it</P> Mon, 28 Sep 2020 08:04:52 GMT https://community.checkpoint.com/t5/Spark-Firewall-SMB/Flow-Control-on-SMB-Appliances/m-p/97684#M4178 Heisenberg 2020-09-28T08:04:52Z https://community.checkpoint.com/t5/Spark-Firewall-SMB/Flow-Control-on-SMB-Appliances/m-p/97687#M4179 <P>Not for Ethernet, only for Serial ! This can be done on <STRONG class="menuoptions">Device</STRONG> &gt; <STRONG class="menuoptions">Advanced Settings</STRONG> page - see under&nbsp;<STRONG>Serial port</STRONG> in Check Point 700/900 Appliances Administration Guide R77.20.87 p.93 ! Also Check Point 700/900/1400 Appliance CLI Technical Reference Guide R77.20.87 p.214.</P> Mon, 28 Sep 2020 08:24:50 GMT https://community.checkpoint.com/t5/Spark-Firewall-SMB/Flow-Control-on-SMB-Appliances/m-p/97687#M4179 G_W_Albrecht 2020-09-28T08:24:50Z