topic Re: Number of Users currently connected to SMB via RA VPN client in Spark Firewall (SMB)

Number of Users currently connected to SMB via RA VPN client

G_W_Albrecht — Fri, 23 Mar 2018 11:09:18 GMT

The sk102803 explains how you can see the number of users currently connected via Client-to-Site VPN on CLI of a Locally Managed 600/700/1100/1200R/1400 appliances.

Connect over SSH to the Locally Managed appliance and log in to Expert mode.
Run the following command:

# pep show user all

This will display a table containing all users which are currently connected with their corresponding IP addresses (in Hexadecimal format).

Re: Number of Users currently connected to SMB via RA VPN client

Vladimir_S — Sun, 06 Sep 2020 08:08:52 GMT

Hello,

I attempted to run "pep show user all", but out put was "daemon did not respond or not running!". Any suggestions?

Re: Number of Users currently connected to SMB via RA VPN client

HristoGrigorov — Sun, 06 Sep 2020 18:02:33 GMT

@Vladimir_S Do you have IA blade enabled ?

Re: Number of Users currently connected to SMB via RA VPN client

SSlater — Mon, 07 Sep 2020 03:17:22 GMT

I would say more specifically, that this command provides all identified users that are being enforced by Identity Awareness blade.

- Identity Awareness will need to be configured for this to work as expected.

Re: Number of Users currently connected to SMB via RA VPN client

Vladimir_S — Mon, 07 Sep 2020 05:10:44 GMT

Identity Awareness blade enabled, but not configured.